New Products

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：46.65mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：41.37mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Crystal type hologram, featuring an attractive, irregularly shimmering crystalline pattern. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：66.67mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらは製作時に「裏側」に向く面です。" (This side should face the "back" during production) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.

Size Diameter：53.04mm Thickness：85µ (*Due to the nature of the holographic lamination process, slight variations in thickness may occur. We appreciate your understanding.) Material PET Origin JAPAN Holographic film specifically for button badges, designed to add a brilliant flair to your creations. This is the Dot type hologram, featuring a fine, delicate sparkle of minute particles. Simply use this in place of your standard clear film to easily add a holographic shine to your design, without the need for any special processing on the design itself. The appearance changes depending on the angle of the light, creating dynamic sparkles that bring a three-dimensional effect to your design. Recommended for taking your button badge production to the next level, whether for fan merchandise or event novelties. *Note: The appearance (vibrancy) of the hologram will vary depending on the base color. Please check the sample images and videos for reference. Regarding orientation during production This film has a front and back side, and using the wrong side will prevent it from printing correctly. Also, since it is difficult to tell the two sides apart with the naked eye, a sheet indicating the back side is included inside the package. Please always follow the orientation shown on this sheet. If any film is left over, please do not discard this sheet, and store it in a way that keeps the correct side identifiable. *The side with the paper stating "こちらがホロ面側です。" (This is the hologram side) is the back side (the side that comes into contact with the design paper). Regarding product characteristics The holographic pattern is transferred via embossing using a master plate, which has a fixed repeating unit size. During the film manufacturing process, as this pattern is joined continuously, a line may appear across your design where the patterns meet. Depending on your design, this line might be noticeable. Please understand and accept this as a characteristic of the product before purchasing.